Jump Kits

Be Ready To Go On A Moments Notice

 

Jim Wauford, WA4REV, submitted this Power Point he had prepared for the
special comm training in Warner Robins, Georgia for the comm
class.  It contains some good ideas. 

To view Jim's presentation, click fetch.

 

The presentation may take a few moments to load/download

 

 Jim, WA4REV writes:

Drawing from my Air Force days of half-century ago, I've refined my "Jump Kit" concept to include several "Go Boxes."

The photos are of my recently completed "Radio Box."  The design objective was to put a station in a box that can be quickly disconnected from power, ground, and antennae, close it up, load it up, and take it to a mission site.  I've accomplished that for a basic radio station (HF/VHF/UHF).  The equipment included in the "Radio Box" is as follows:

> Kenwood TS-430A HF radio
> Kenwood TM-D70 Dual Band Radio
> MFJ 948 Tuner
> MFJ-4245MV Switching Power Supply
> MFJ-269 Analyzer
> Rigrunner Power Distribution Panel
> Antenna Switch (I use the antenna sw. for tuning purposes, not actually to switch antennas.)

For my "Digital Box" ie. Winlink, I have a SCS PTC-IIex Pactor 3 modem, an old Toshiba Satellite laptop computer and a Canon BJC-240 printer .  The actual box hasn't been built yet.

Of course my Jumpkit also includes: tool box, accessories box, and personal items box (bag.)

Additionally, I have an ICOM IC 2100 VHF radio, a Yaesu VX -7R Handhel tri-bander, and a mobile unit consisting of a Kenwood TS-2000 with the RC-2000 Controller and Hustler antenna with 75 meter, 40 meter, and 20 meter resonators.  I have the three-way adapter to mount all three resonators on the same mast at one time, but it gets top heavy.  For the most part, I just keep the 40 meter resonator on.  In addition to the Hustler, I have a copper J-pole VHF/UHF (homemade) antenna and a 40 meter Hamstick dipole (a la Ed Cravey).  I've been seriously considering buying a 75/40/20 SATERN antenna, but I haven't been able to confirm the usefulness of the design.  It's made by Radiowavz in St. Louis, MO (actually Lake St. Louis).

I don't know if the results of my experimenting will give anyone else any ideas, but if anyone wants to draw from my ideas, it's public domain as far as I'm concerned.  I'll be happy to discuss what I've done and what I have planned with anyone interested. 

BTW the box is made of 1/4 inch plywood reinforced on both sides with one ply of Bidirectional fiberglass.  The walls and shelf support joints are all joined together with 2 inch BID tapes in the corners.  The shelves slide in and out and the Radio, Tuner, and Power Supply are fastened to the shelves by means of fiberglass "brackets."   It's painted outside with grey fleck stone paint and with flat black enamle on the inside.  I have a folding luggage caddy to roll it around on.  I will soon be installing a central ground bar in the box so that I'll only have to make one ground connection when setting up.

I'm very pleased with it so far.  I tested it in a trial deployment during ARRL field day.  Everyone who saw it was impressed.

Hope I haven't bored you to tears by all this. Feel free to share any of this as you see fit.

God Bless.

Jim WA4REV

Click thumbnails for larger view

113_1373.JPG (31857 bytes) 113_1374.JPG (30061 bytes) 113_1379.JPG (40402 bytes) 113_1380.JPG (39077 bytes) 113_1384.JPG (36241 bytes) 113_1386.JPG (30603 bytes)

 

Thanks Jim for the  information. Your radio "GO BOX" is FB for sure...........

 

 

We've put together a list of things to include in your "jump kit". Of course you can customize the contents to suit your own needs and requirements. The list is by no means all inclusive so you should give plenty of thought to putting the kit together. Much of what you pack will depend on how long you anticipate being in the field.  The below items will give you a good start.

 

The Radio Bag

Small Hard Shell Cases are often used to house radios.

 

The Personal Bag

The area you are going into will likely be without power, heat, telephone service and water. Most businesses will not be open due to the emergency. So pack up and be READY.

 

Amateur Radio Operators are masters of IMPROVISATION:

Be sure to have things such as insulators, wire, small parts and of course duct tape.

Home ] Coordinator & Directors ] Operation Plan ] Forms ] Directed Echolink Net ] 40 Meter Net Protocol & Preamble ] 40 Meter NCS Schedule ] Disaster Calling Frequencies ] SouthBear News/Info ] National SOS Network ] National SKYWARN ] Comm Units ] [ Jump Kit Ideas ] SouthBear Nets ] Hurricane Tracking and Other Info ] D-Star ] Photo Album ] Roster & Station Profile ]